Hue Saturation Transformation "Clear Current Selection" and "Invert Current Selection" Problem

Moderator: jsachs

Post Reply
jfoster
Posts: 169
Joined: December 1st, 2011, 1:39 pm
What is the make/model of your primary camera?: Canon/5DMIII

Hue Saturation Transformation "Clear Current Selection" and "Invert Current Selection" Problem

Post by jfoster »

Clear Current Selection and Invert Current Selection not updating properly when DIsplay Input is selected.

To reproduce:

1. Open PWP (8.0.296)
2. Open Hue Saturation Chart Test Pattern
3. Open Hue Saturation Transformation
4. Select Display Input
5. Select regions of the Hue Color Hex Histogram
6. Right-Click on Hue Color Hex Histogram and select Clear (or Invert) Selection
7. Note that selection is not updated to reflect previous step

Jeff
jfoster
Posts: 169
Joined: December 1st, 2011, 1:39 pm
What is the make/model of your primary camera?: Canon/5DMIII

Re: Hue Saturation Transformation "Clear Current Selection" and "Invert Current Selection" Problem

Post by jfoster »

Also, the Help says “Click and drag on the input image to select the patches that correspond to the colors in the image.”

However, clicking and dragging on the Display Preview image also updates the selections in the histogram in the single image preview mode, but not in the side-by-side mode.

Jeff
jsachs
Posts: 4203
Joined: January 22nd, 2009, 11:03 pm

Re: Hue Saturation Transformation "Clear Current Selection" and "Invert Current Selection" Problem

Post by jsachs »

Fixed for next release.
Jonathan Sachs
Digital Light & Color
Post Reply