Unsharp Mask Help page

Moderator: jsachs

Post Reply
Posts: 31
Joined: December 10th, 2009, 11:52 pm
What is the make/model of your primary camera?: Canon 70D

Unsharp Mask Help page

Post by johnp »

In looking at the Unsharp Mask help page I notice:
a) There is no description of the 'Sharpen Factor' setting

b) The document mentions a Threshold setting of 100%, bit the slider only seems to go to 50%.
It's also a bit counter intuitive that 50% is all the way to the left, and 0%it all the way to the
right. I normally expect things to get higher as you slide to the right.


John P

Posts: 3237
Joined: January 22nd, 2009, 11:03 pm

Re: Unsharp Mask Help page

Post by jsachs »

I have updated the help topic for Unsharp Mask for the next release.

A while back some folks complained that the threshold sliders for sharpening and blurring working backwards from each other so the direction of the sharpening sliders was reversed. All the way to the right gives the full sharpening or blurring effect.
Jonathan Sachs
Digital Light & Color

Post Reply