Opening an Existing Mask Crashes PWP 8.0.290

Moderator: jsachs

Post Reply
jfoster
Posts: 169
Joined: December 1st, 2011, 1:39 pm
What is the make/model of your primary camera?: Canon/5DMIII

Opening an Existing Mask Crashes PWP 8.0.290

Post by jfoster »

Opening an Existing Mask Crashes PWP

To reproduce:

1. Open PWP
2. Create Checkerboard Test Pattern
3. Open Mask Transformation
4. Use Paint Tool to scribble test mask on Checkerboard Test Pattern
5. Close Mask Transformation by Clicking OK
6. Create another Mask Transformation
7. Attempt to open mask saved in Step 5
8. PWP crashes.

Jeff
jsachs
Posts: 4203
Joined: January 22nd, 2009, 11:03 pm

Re: Opening an Existing Mask Crashes PWP 8.0.290

Post by jsachs »

Unfortunately, fixing the double-click on zero-centered Amount controls apparently had some unanticipated side effects.

I have fixed this and will upload a new version shortly. I also fixed a problem causing the slider to be displayed even for Amount controls that are not supposed to have one (such as the ones in the Mask transformation).
Jonathan Sachs
Digital Light & Color
jfoster
Posts: 169
Joined: December 1st, 2011, 1:39 pm
What is the make/model of your primary camera?: Canon/5DMIII

Re: Opening an Existing Mask Crashes PWP 8.0.290

Post by jfoster »

I’m back on version 8.0.288 for the moment so don’t stress on my account.

Jeff
Post Reply